Chapter 2: Installing The Manager Application; Chapter 3: Voip2All Basic Operations; Chapter 3.1: Connecting The Menagement Software To The Voip2All - Discovery Telecom VoIP2 All Series User Manual

2009
DTT USER MANUAL
Chapter 2: Installing the Manager Application
Before operation, configuration settings must be applied to the VoIP
Configuration is done on an auxiliary computer by using the VoIP
Windows Application provided for MS‐Windows operating system.
Chapter 2.1: Install the VoIP
1. Insert the VoIP
2. Through MS Explorer, navigate to the installation CD drive.
3. Double‐click 'setup.exe' to install the Management Application.
4. Click Next.
5. The 'Setup Type' window will open.
6. Select Complete and click next.
7. Click Install. The VoIP
message appears.
Chapter 3: The VoIP
After installing the Management application, launch the program from the icon located on your
desktop 'VoIP2All**.exe' to define the connection between the PC and the VoIP
below.
Launch the VoIP
a. Start>Programs>DTT‐>VoIP
The VoIP
Chapter 3.1: Connecting the Management Software to the VoIP
VoIP 2 All™ Series: 4 Channel Gateway User Manual
2
ALL Management Software on a MS‐Windows PC
2
ALL Management Installation CD into the CD drive of the PC.
2
ALL Management application installs itself. Wait until a 'Completion'
2
ALL Basic Operations
2
ALL Management by pressing
2
ALL management application window should now open, pictured below:
on your PC desktop, or:
2
ALL Management.
2
ALL Gateway.
2
ALL Management MS‐
2
ALL, described
2
ALL
10