Chapter 3.2: Setting Up The Clock; Chapter 3.3: Changing The Ip Adress Of The Gateway - Discovery Telecom VoIP2 All Series User Manual

2009
DTT VoIP2All USER MANUAL
1. Press
2. Enter in the 'Host Address' the IP Address of the VoIP
is 10.16.2.245), as pictured.
3. Enter in the 'Port Number' the port of the VoIP
4. Enter in the 'Password' the password of the VoIP
admin).
5. Press OK to connect.
You must wait 30 seconds after connecting the power to the VoIP
Note:
initialization process to end before connecting with the PC Management.
Note: If you can't remember the IP Address see Appendix A: Com Port.
Chapter 3.2: Setting Up the Clock
1. Go to 'System' in the tool bar.
2. Select in the Date box the date of the VoIP
3. Enter in the Time box the time of the VoIP
4. Select in the Date Format how to display the date, (Day:Month:Year) or (Year:Month:Day).
5. Press Save to change the time and date.
Chapter 3.3: Changing the IP Address of the Gateway
1. Open the VoIP window; select the 'General' tab.
2. In the 'IP Address' box enter the new IP address for the gateway.
3. Press Save.
4. Disconnect from the gateway.
5. Restart the gateway, wait 30 seconds for initialization, connect with the new IP address.
Chapter 3.4: Internal SIP Server
The Gateway has an internal SIP Server that is able to register up to 32 SIP clients. This SIP client
can be: a VoIP phone, or external SIP Servers or IP PBX.
VoIP 2 All™ Series: 4 Channel Gateway User Manual
in the toolbar. The Selected Connection window will open.
2
ALL Gateway (The default IP Address
2
ALL gateway (The default port is 2007).
2
ALL gateway (The default password is
2
ALL gateway.
2
ALL gateway.
2
ALL gateway for the
11