Chapter 4.3: Tones Levels - Discovery Telecom VoIP2 All Series User Manual

2009
DTT VoIP2All USER MANUAL
Chapter 4.3: Tone Levels
In the window below, the user may set the tone for each port. Rx is the tone of the speaker and
Tx is the tone of the microphone. Press the Tone tab to see:
Adjusting the Levels
1. Click the blank area on the right side of the tone bar, in the grey blank area, a slider will
appear. Adjust the slider to the desired level (From ‐30dbm to +30dbm).
2. Repeat this action for all the tones you wish to adjust.
3. Press Save to activate and save all changes.
Chapter 4.4: SIP Servers
In the window below, the user may control the SIP Server settings. Press the 'SIP' tab to access
the window below:
VoIP 2 All™ Series: 4 Channel Gateway User Manual
Setup the 'Remove Prefix' to the number of digits You wish to remove (2 digits)
•
Dial from the PBX the number 390545555555.
•
The call will now be routed through this port to the mobile phone by removing the
•
prefix (39) and calling the desired cellular number 0545555555
21