A format progress bar (Figure 56) will be shown on the menu. After the disk has been formatted, the status of
the disk will change to Active.
5.
Click the Done button to exit out of Disk Management.
6.
Enabling Disk Overwrite
Enabling disk overwrite will allow the DVR to overwrite the installed disks once the disks are full.
To enable disk overwrite:
Enter the Disk Management menu, shown in Figure 54 by going to Main Menu > System Configuration > Disk
Management.
Check the Overwrite checkbox.
1.
Click the Save button.
Click the Done button to exit out of Disk Management.
2.
3.
4.
Managing Files
Searching for Recorded Files
Previously recorded files can be searched by criteria in the File Management menu.
To search for recorded files:
Enter the File Management menu, shown in Figure 57 by going to Main Menu > System Configuration > File
Management.
1.
Figure 55. Disk Format Confirmation
Figure 56. Disk Format Progress Bar
63