Enabling Disk Overwrite; Managing Files; Searching For Recorded Files - HIKVISION DS-7304HFI-SE User Manual

User Manual of DS-7304HFI-SE DVR
A format progress bar (Figure 51) will be shown on the menu. After the disk has been formatted, the status of
5.
the disk will change to Active.
Click the Done button to exit out of Disk Management.
6.

9.2.1 Enabling Disk Overwrite

Enabling disk overwrite will allow the DVR to overwrite the installed disks once the disks are full.
To enable disk overwrite:
1. Enter the Disk Management menu, shown in Figure 49 by going to Main Menu > System Configuration > Disk
Management.
2. Check the Overwrite checkbox.
3. Click the Save button.
4. Click the Done button to exit out of Disk Management.

9.3 Managing Files

9.3.1 Searching for Recorded Files

Previously recorded files can be searched by criteria in the File Management menu.
To search for all recorded files:
Enter the File Management menu, shown in Figure 52 by going to Main Menu > File Management.
1.
2. Select the cameras that you would like to include in the search. Analog cameras are listed on the first row, preceded
with the letter A. Digital cameras are listed on the second row, preceded with the letter D. If you would like include all
cameras in the search, check the All box.
Figure 51. Disk Format Progress Bar
Figure 52. File Search Menu
57