Rear Panel; Remote Control - Strong PRIMA V User Manual

3. Mode indicator

2.3 Rear Panel

1. AnT In
2. To TV
3. TV sCART
4. s / PDIf
5. HDMI
6. Power Cord

2.4 Remote Control

1. q
2. !
3. PG+/PG-
4. DTV/VCR
5. Info
6. Vol+/Vol-
7. MEnU
8. EXIT
9. pq
10. tu
11. ok
12. RECoRD
13. TIMEsHIfT
14. 0~9
15. EPG
16. RECAll
17. AUDIo
18. TV/RADIo
19. fAV
20. fIlE
21. TTX
22. sUbTITlE
23. 5 6
24. Coloured buttons
4
RED indicates that the receiver is in STANDBY mode.
GREEn indicates that the receiver is in OPERATING mode.
To connect to your antenna for the reception of broadcast signal.
To connect to the terrestrial antenna input of your TV set.
This connection will allow you to watch analogue terrestrial
programmes via the tuner in your TV.
To connect your receiver with your TV set using a SCART cable.
To connect your receiver to a digital audio amplifier.
To connect your receiver with your TV set using a HDMI cable.
Your receiver requires a voltage of 220~240 V AC (Auto-
selectable), 50/60 Hz +/-5%. Check the local power specification
before connecting your receiver to the wall outlet.
Turns the receiver On/Standby
Mutes audio output of the receiver
Page up/down and 10 channels steps in channel list mode
No function
Shows the current channel information
Volume up/down
Opens the main menu, in menu you will get one step back
Exits from the menu or sub-menu
Menu Off: Change channel to previous/next.
Menu On:Moves the cursor up/down.
Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
Records the TV programme to the connected storage device
Activates the time shift function
Channel selection or value input
Shows the EPG (Electronic Programme Guide) in TV mode
Back to previous shown channel
Sets the current audio channel to left, right or stereo
Toggles between TV or RADIO mode
Favourite group selection
Shows the Media Player list
Shows Teletext on OSD (On Screen Display)
Shows list of subtitled languages
Fast rewind/Fast forward
For Multimedia and Teletext functions
PART 1 • English
Fig. 2
Fig. 3