System Setup - Strong PRIMA V User Manual

Antenna Power:
Beeper:
Channel No.:
Press EXIT to leave the Aerial Adjustment screen.
7.2.4 lCn (logical Channel numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator,
channels will be stored in an operator defined order. Set LCN to On to activate operator defined
channel numbering or Off to store channels in found order.

7.3 system setup

This menu allows you to manage the system settings of your receiver. It consists of the following sub-
menus: Language, TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting, Favourite
and Auto Standby.
Press pq to highlight the menu of choice and press ok advance to the next screen. Use pq to
move the highlight to the setting of choice. Values can be changed with tu. Press EXIT to leave.
7.3.1 language
This menu allows you to set up your language preferences.
Language:
First Audio:
Second Audio:
Subtitle Language :
Subtitle:
Teletext:
7.3.2 TV system
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution:
Aspect Mode:
Connection:
12
Set to On if you use an active antenna. When set to On, 5 V will be present on
the ANT IN connector of the receiver. Select Off for passive antennas.
Select On for an audible indication of signal reception. Off turns the
beeper off.
Select a channel that is known to carry a broadcast in your region. The Signal
Strength and Signal Quality bars give a visual indication of the reception.
Adjust your antenna to obtain maximum signal strength and quality.
Use tu to select the language for the On Screen Display.
Use tu to select Audio language.
Use tu to select a language that will be played when the language selected
at First Audio isn't available.
Use tu to select the preferred subtitle language.
Use tu to select the preferred subtitle type to be displayed automatically.
Select Normal, Hard of Hearing or Off
Use tu to select the preferred teletext language (when available.)
Toggles between 576i up to 1080p. Please use a setting that matches your TV's
specifications. After a selection is made, you will be asked to confirm. Note:
Selection is only applicable on HDMI.
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are: Auto (automatic detection of aspect
ratio), 4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your
4:3 TV), 4:3 letterbox (black bars on top and under the picture on a 4:3 TV)
and 16:9 (use this setting for 16:9 TV sets).
Use this option to select the connection to your TV set. Select HDMI or TV
SCART. If connection type HDMI is selected, then only the CVBS signal is
available on the TV SCART.
PART 1 • English