Table of Contents
Advertisement
Hardware Installation Procedure
STEP 1:
After unpacking the unit, connect the power supply to the unit.
STEP 2:
Use an Ethernet cable to connect the unit to the network.
STEP 3:
Connect your device to the desired port on the unit.
STEP 4:
Place or mount the unit. The unit may be placed on a
horizontal surface such as a desktop, or mounted on the wall.
Mounting Options
The NPort IA5000A-I/O and IAW5000A-I/O are designed to be attached
to a DIN rail or mounted on a wall.
STEP 1: Insert the top of the DIN
rail into the slot.
Wall Mounting (optional)
For some applications, it may be more convenient to mount the NPort
IA5000A-I/O or IAW5000A-I/O to a wall, as illustrated below.
STEP 2: The DIN rail attachment
unit will snap into place as shown at
right.
- 5 -
Advertisement
Table of Contents
