Pop-Up Messages - Husqvarna Viking Sapphire 875 Quilt User Manual

Operating the machine

Pop-up messages

Bobbin winding on
This pop-up message appears when the bobbin winding spindle is
pushed to the right and bobbin winding is activated.
Presser foot too high
Your machine will not sew if there is too much fabric under the
presser foot. Remove some of the fabric or use another fabric.
Press the OK button, or tap the foot control to close the pop-up
message.
2
Machine set for twin needle
When you have set the machine for twin needle in the SET Menu,
a pop-up message is shown to remind you of the setting when
you turn on your machine. Press the OK button or tap the foot
control to close the pop-up message.
Stitch width limited for twin needle
This message is shown when the machine is set for twin needle
and you try to adjust the stitch width to wider than possible with
the twin needle. Close the pop-up message by pressing the OK
button.
Machine set for straight stitch
This message is shown when the stitch width safety is on and you
turn on the machine or try to adjust the stitch width. Close the
pop-up message by pressing the OK button.
This stitch cannot be sewn with twin needle
This pop-up message appears when the machine is set for twin
needle and you select a stitch that cannot be sewn with twin
needle. Press the OK button to close the pop-up message.
31