Do you have a question about the Rose 605 and is the answer not in the manual?
Questions and answers
Lorraine
June 8, 2025
I was given a husqvarna rose sewing machine and i want to do plain sewing how do set the machine
1 comments:
Mr. Anderson
August 16, 2025
To set up the Husqvarna Rose 605 sewing machine for plain sewing:
1. Place the machine on a firm surface. 2. Remove the extension bed by tilting it away from the back of the machine. 3. Connect the foot control cord to the first socket on the bottom right side of the machine. 4. Plug the main power cord into the back socket on the right side. 5. Plug the foot control into the front socket. 6. Press the power switch to turn on the machine and light. 7. The machine will default to stitch number one, which is a straight stitch at standard length. This is suitable for plain sewing.
The info display window will show recommended settings for the selected stitch.
This answer is automatically generated
KATHY LUSKUS
April 4, 2025
HOW TO THREAD MY ROSE 605
1 comments:
Mr. Anderson
April 4, 2025
To thread a Husqvarna Viking Rose 605 sewing machine:
1. Make sure the machine is turned off. 2. Place your thread spool on the spool pin. 3. Pull the thread through the thread guide. 4. Follow the threading path indicated on the machine, making sure the thread goes through the tension discs correctly. 5. Continue threading down toward the needle area, ensuring the thread passes through all guides. 6. Thread the needle from front to back. 7. Pull out a few inches of thread under the presser foot.
Refer to page 10 of the instruction book for detailed threading instructions.
This answer is automatically generated
KATHY LUSKUS
April 4, 2025
HOW TO THREAD MY ROSE 605
1 comments:
Mr. Anderson
April 4, 2025
To thread a Husqvarna Viking Rose 605 sewing machine, follow these steps:
1. Ensure the machine is turned off. 2. Place the spool of thread on the spool pin. 3. Guide the thread through the upper thread guide. 4. Pull the thread down and around the tension mechanism. 5. Thread the take-up lever from right to left. 6. Bring the thread down through the guides above the needle. 7. Thread the needle from front to back.
If the upper thread is not correctly threaded, refer to page 10 of the manual for detailed instructions.
Need help?
Do you have a question about the Rose 605 and is the answer not in the manual?
Questions and answers
I was given a husqvarna rose sewing machine and i want to do plain sewing how do set the machine
To set up the Husqvarna Rose 605 sewing machine for plain sewing:
1. Place the machine on a firm surface.
2. Remove the extension bed by tilting it away from the back of the machine.
3. Connect the foot control cord to the first socket on the bottom right side of the machine.
4. Plug the main power cord into the back socket on the right side.
5. Plug the foot control into the front socket.
6. Press the power switch to turn on the machine and light.
7. The machine will default to stitch number one, which is a straight stitch at standard length. This is suitable for plain sewing.
The info display window will show recommended settings for the selected stitch.
This answer is automatically generated
HOW TO THREAD MY ROSE 605
To thread a Husqvarna Viking Rose 605 sewing machine:
1. Make sure the machine is turned off.
2. Place your thread spool on the spool pin.
3. Pull the thread through the thread guide.
4. Follow the threading path indicated on the machine, making sure the thread goes through the tension discs correctly.
5. Continue threading down toward the needle area, ensuring the thread passes through all guides.
6. Thread the needle from front to back.
7. Pull out a few inches of thread under the presser foot.
Refer to page 10 of the instruction book for detailed threading instructions.
This answer is automatically generated
HOW TO THREAD MY ROSE 605
To thread a Husqvarna Viking Rose 605 sewing machine, follow these steps:
1. Ensure the machine is turned off.
2. Place the spool of thread on the spool pin.
3. Guide the thread through the upper thread guide.
4. Pull the thread down and around the tension mechanism.
5. Thread the take-up lever from right to left.
6. Bring the thread down through the guides above the needle.
7. Thread the needle from front to back.
If the upper thread is not correctly threaded, refer to page 10 of the manual for detailed instructions.
This answer is automatically generated