Ways To Configure The Serimux; Web Interface; Configuration Menu; Command Line Interface - NTI SERIMUX-SECURE-x Installation And Operation Manual

Secure access console switch

Table of Contents

Ways to Configure the SERIMUX

This section discusses the three ways to configure the SERIMUX, web interface, configuration menu, and command line interface.

The web interface provides an easy way to configure the SERIMUX. The root user and system administrator can configure all

features from it. Port administrators can configure ports, including port clustering, but cannot modify system settings. Users cannot

use the web interface for configuration. To access the web interface, enter the SERIMUX IP address or host name in a

browser's URL window. The default IP address is 192.168.161.5. The following page is displayed after log in.

Note: The SERIMUX web interface features HTTPS for secure access

NTI

The root user and system administrator have full access to the configuration menu from a Telnet session or a serial connection

through the console port. Functionality is similar to the web interface, with the exception of custom menus, which can be created

only from the web interface. The configuration menu is presented to system administrators automatically. Root users access it by

entering the command configmenu. Port administrators can access this menu but can modify serial port configuration only.

Users cannot access this menu.

The command line interface can be accessed from a Telnet session or from the console port. The root user always has access to

this interface. The system administrator can be granted read-only permission as well. No other users can access the command

line interface.

Table of Contents

Do you have a question about the SERIMUX-SECURE-x and is the answer not in the manual?