Setup Tcp/Udp Server Address - Sanav MU-201 User Manual

4.15 Setup TCP/UDP Server Address

Users can use this command to define the TCP/UDP Server Address of MU-201.
Setup format：#「username」,「Password」,「Function mode」, 「TCP/UDP server address」*
Example:
Command: #username,0000,18,0.0.0.0:0000*
The table 4.15.1 describes the meaning of each segment in the message above
Text Keyed In SMS
#
username
0000
18
0.0.0.0:0000
*
Situation
Setup Succeeds
MU-201 is in Emergency Mode
Description
Start sign.
Default ID of MU-201.
If you have changed the Username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode 18 defines to set up the TCP/UDP Server Address
TCP/UDP Server Address and Port
End sign.
Table 4.15.1 The explanation of each segment of command
The table 4.15.2 shows each confirmation message reply after setup
Message Reply
Device TCP/UDP is updated.-18-TCP/UDP address Setting,4.092
in emergency, TCP/UDP setup is not allowed.,3.830V
26