Edit An Ipv6 Link-Local Address - ZyXEL Communications XGS2220 Series User Manual

Figure 123 SYSTEM > IPv6 > IPv6 Addressing > IPv6 Link-Local Address Setup
The following table describes the labels in this screen.
Table 65 SYSTEM > IPv6 > IPv6 Addressing > IPv6 Link-Local Address Setup
LABEL
Index
Interface
IPv6 Link-Local
Address
IPv6 Default
Gateway
Edit

24.5.1 Edit an IPv6 Link-Local Address

Use this screen to configure the link-local address and default gateway of an IPv6 interface you create
in the SYSTEM > Interface Setup screen. Select an entry and click Edit in the SYSTEM > IPv6 > IPv6
Addressing > IPv6 Link-Local Address Setup screen to display this screen.
Figure 124 SYSTEM > IPv6 > IPv6 Addressing > IPv6 Link-Local Address Setup > Edit
The following table describes the labels in this screen.
Table 66 SYSTEM > IPv6 > IPv6 Addressing > IPv6 Link-Local Address Setup > Edit
LABEL
Interface
Link-Local
Address
Default
Gateway
Apply
Chapter 24 IPv6
DESCRIPTION
This is the interface index number.
This is the name of the IPv6 interface you created.
This is the static IPv6 link-local address for the interface.
This is the default gateway IPv6 address for the interface.
Select an entry's check box to select a specific entry.
Click Edit to edit the selected entry.
DESCRIPTION
Select the IPv6 interface you want to configure.
Manually configure a static IPv6 link-local address for the interface.
Set the default gateway IPv6 address for the interface. When an interface cannot find a routing
information for a frame's destination, it forwards the packet to the default gateway.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
XGS2220 Series User's Guide
176