The Network configuration page appears with the Device tab open.
Figure 15 – Network Configuration – Device Tab
From the Configuration menu, you can configure the network, Users, Switch
Configuration, Serial Port, Security, User Targets, Date & Time, Power Outlets,
and Power Devices settings. After making all configuration changes, you must click
the
button in the toolbar for the changes to go into effect.
Web Configuration Interface Tabs
3.2.1
The following table summarizes the Web configuration interface tabs.
Tab
Description
For configuration of the device settings, IP address, and centralized management
Device
For adding, editing, deleting, and blocking system Users
Users
For configuration of the KVM switch settings
Switch Configuration
For configuration of the Serial port settings
Serial Port
For configuration of the security settings
Security
For configuration of the access rights of each user to target servers
User Targets
For configuring the system date and time
Date & Time
Configuring the Network
Logging Onto the Web Configuration Interface
User Guide | 25