Table of Contents
Advertisement
Configuring the Network
Configuring the Network Settings
recommend using MAC address reservations in the DHCP server to ensure that the IP
recommend using MAC address reservations in the DHCP server to ensure that the IP
recommend using MAC address reservations in the DHCP server to ensure that the IP
address of the Smart 216/232
Consult your Network Administrator regarding the use of the DHCP
your Network Administrator regarding the use of the DHCP.
If you have access to the server
device name will appear on the DHCP server's interface, making it easy to
device name will appear on the DHCP server's interface, making it easy to
device name will appear on the DHCP server's interface, making it easy to
locate.
To configure the device IP address
the device IP address, do one of the following:
Select automatic IP address
enable a DHCP server that is active on the same network to which Smart
enable a DHCP server that is active on the same network to which
IP is connected, to provide automatic IP assignment
is connected, to provide automatic IP assignment.
Select manual IP address assignment – Clear the Enable DHCP checkbox to disable
Select manual IP address assignment
the DHCP, and then type the
LAN 1, provided by your Network Administrator
, provided by your Network Administrator.
Configuring Centralized Management Settings
Configuring Centralized Management Settings
3.4.3
Minicom's Centralized Management IP-based systems ensure secure control of
Minicom's Centralized Management IP
servers and network devices, and power and user administration in the data center
servers and network devices,
environment. The Centralized Management systems combine out-of-band
environment. The Centralized Management systems combine
access with modern IT standards and requirements. They are the most
access with modern IT standards and requirements. They are the most
comprehensive remote server maintenance solutions available in the market today.
nsive remote server maintenance solutions available in the market today.
nsive remote server maintenance solutions available in the market today.
To configure Centralized Management settings
Centralized Management settings:
1. Select the Enable Centralized Management
Enable Centralized Management checkbox to enable Smart 216/232
be remotely managed by a Centralized Management system.
be remotely managed by a Centralized Management system
When managed by Centralized Management, only Network Configuration is
When managed by Centralized Management, only Network Configuration is
When managed by Centralized Management, only Network Configuration is
available from the Smart
available from the Smart 216/232 IP configuration page. All other settings, such
as Device Upgrade, Factory Restore, and SSL Certificate are disabled and are
as Device Upgrade, Factory Restore, and SSL Certificate are disabled and are
as Device Upgrade, Factory Restore, and SSL Certificate are disabled and are
managed from Centralized Management.
managed from Centralized Management.
2. Select the Manager Auto Discovery
Manager Auto Discovery checkbox to cause the Centralized Management
system to automatically detect
automatically detect Smart 216/232 IP, if they both reside on the same
network segment.
OR
In Manager IP Address, type the static IP address of the Centralized Management
Manager.
Although not required, it is
Although not required, it is recommended to type the Manager IP Address
if the Smart 216/232
Centralized Management Manager.
Centralized Management Manager
28 | Smart 216/232 IP
216/232 IP will not be changed.
access to the server, your configured (or default) Smart
address assignment – Select the Enable DHCP checkbox to
type the IP Address, Subnet Mask, and Default Gateway
power and user administration in the data center
IP configuration page. All other settings, such
, type the static IP address of the Centralized Management
, type the static IP address of the Centralized Management
IP resides on the same network segment as the
Smart 216/232 IP
checkbox to
Smart 216/232
checkbox to disable
Default Gateway
secure control of
KVM via IP
216/232 IP to
the Centralized Management
on the same
Manager IP Address even
as the
f
or
Advertisement
Table of Contents
