Installation
Overview
2 Installation
2.1 Overview
Install the Smart 216/232 IP system as follows:
1. Remove the Smart 216/232 IP system from the package, and check that all
components are present and in good working condition.
2. Mount the Smart 216/232 IP unit in a rack.
3. Make all hardware connections between the power source, Smart 216/232 IP,
services, network, and KVM console.
4. Power on the Smart 216/232 IP unit.
2.2 System Components
Before installing the Smart 216/232 IP system, verify that you have all the
components on the following list, as well as any other items required for installation.
The Smart 216/232 IP system consists of:
One Smart 216/232 IP (p/n 1SU70036) or one Smart 232 IP (p/n 1SU70037)
One RS232 Download cable (p/n 5CB40419)
ROCS - PS/2, USB (ordered separately)
CAT5 cables (1.5 m provided)
A rack mounting kit (p/n 5AC20247)
The Smart 216/232 IP Unit
2.2.1
The Smart 216/232 IP Unit front panel is illustrated in Figure 1.
The following table describes the functionality of the LEDS on the front panel of the
Smart 216/232 IP.
14 | Smart 216/232 IP
Figure 1 – Smart 216 IP Unit Front Panel