Table of Contents
Advertisement
Configuring the Network
Reloading a Page
To restore data:
1. In the Backup/Restore Data
In the Backup/Restore Data page (see Figure 38), in Restore data from
Browse button to locate and select the file which contains the data to restore
Browse button to locate and select the file which contains the data to restore
Browse button to locate and select the file which contains the data to restore
2. Click Restore.
The configuration data is restored.
configuration data is restored.
3. Click Close.
3.14 Reloading a Page
Reloading a Page
You can load the parameters on any configuration page with the settings from the
You can load the parameters on any configuration page with the settings from the
You can load the parameters on any configuration page with the settings from the
Smart 216/232 IP device. This is convenient if you have already ch
the page, and want to restore the device settings.
the page, and want to restore the device settings.
To reload a page:
1. In the Configuration page
Configuration page toolbar, click the
The parameters are populated with the device settings.
The parameters are populated with the device settings.
3.15 Saving Changes
Saving Changes and Logging Out
Once you have completed configuration changes, you must save them.
Once you have completed configuration changes, you must save them.
Changes to the SSL Certificate
hanges to the SSL Certificate and Security pages require saving and restarting.
Saving the configuration changes after changing the Device page restarts the unit
Saving the configuration changes after changing the Device page restarts the unit
Saving the configuration changes after changing the Device page restarts the unit
automatically.
To save changes:
1. In the Configuration page
Configuration page toolbar, click the
If you made changes to the Device page, the system automatically prompts you
f you made changes to the Device page, the system automatically prompts you
f you made changes to the Device page, the system automatically prompts you
to reboot and restart the device, by displaying
to reboot and restart the device, by displaying the following device reboot
confirmation box:
3. Click Yes.
A message box informs that Save has completed.
A message box informs that Save has completed.
46 | Smart 216/232 IP
device. This is convenient if you have already changed settings on
Figure 39
– Device Reboot Confirmation Message
button.
pages require saving and restarting.
button.
the following device reboot
data from file, click the
.
anged settings on
Advertisement
Table of Contents
