Figure 23 - Security Page - Tripp Lite 0SU70036 User Manual

Hence, when "Enable direct SSH connection" is selected when "Enable direct SSH connection" is selected:
1. Connect to the Serial device, by to the Serial device, by typing the IP address of the Smart 216/232 IP,
followed by the TCP port number in your SSH client. followed by the TCP port number in your SSH client.
2. Log in to the Smart 216/232 IP SSH shell with the user name and password in to the Smart 216/232 IP SSH shell with the user name and password in to the Smart 216/232 IP SSH shell with the user name and password
configured in the Smart 216/232 IP.
Restart the Smart 216/232 IP device after adding Telnet permissions to the Restart the Smart 216/232 IP device after adding Telnet permissions to the Restart the Smart 216/232 IP device after adding Telnet permissions to the
users in order to enable login over SSH connection. users in order to enable login over SSH connection.
These settings are customizable, enabling you to choose the TCP port used for that These settings are customizable, enabling you to choose the TCP port used for that These settings are customizable, enabling you to choose the TCP port used for that
purpose, if that port is already taken by another service on your network. You can
operate the serial connection by using any SSH client, such as PuTTY and SecureCRT. operate the serial connection by using any SSH client, such as PuTTY and SecureCRT. operate the serial connection by using any SSH client, such as PuTTY and SecureCRT.
To configure the security settings configure the security settings:
1. From the configuration menu, select From the configuration menu, select Security
The Security page appears.
2. In the Account Blocking
 In Block after, type
username or password in a time period specified in attempts within username or password
forced time lock.
Smart 216/232 IP.
already taken by another service on your network. You can already taken by another service on your network. You can
appears.
Figure 23 – Security Page
ing section:
e the number of allowable attempts to log in with a wrong
Configuring the Network Configuring
Configuring
ddress of the Smart 216/232 IP,
.
in with a wrong
attempts within, prior to a
the Security Settings
User Guide | 35