Conducting A Remote Session; Starting A Remote Session - Tripp Lite 0SU70036 User Manual

Conducting a Remote Session

Starting a Remote Session

4 Conducting a Remote Session Conducting a Remote Session
A remote session enables remotely accessing remote session enables remotely accessing any of the target servers connected to
Smart 216/232 IP. Before starting a remote session,
configured.
You can perform the following from the remote session: You can perform the following from the remote session
 Display/hide the toolbar.
 Set the session profile.
 Display the session in full screen mode. Display the session in full screen mode.
 Verify Remote Presence Solutions information. Verify Remote Presence Solutions information.
 Adjust video settings.
 Power manage the target servers.
 Manage keyboard sequences. Manage keyboard sequences.
 Synchronize mouse pointers. Synchronize mouse pointers.
 Switch to a different server or device. Switch to a different server or device.
4.1 Starting a Remote Session Starting a Remote Session
You can start a remote session by You can start a remote session by:
 Logging into the system, as explained in steps 1 to 5 of the procedure in Secti ogging into the system, as explained in steps 1 to 5 of the procedure in Section ogging into the system, as explained in steps 1 to 5 of the procedure in Secti
3.2
 Selecting the target that you want to connect to Selecting the target that you want to connect to
 Displaying the target inside a remote console window Displaying the target inside a remote console window
To start a remote session:
1. Log into the Smart 216/232 IP system Log into the Smart 216/232 IP system, by following steps 1 to 5 of the procedure
in Section 3.2.
The Targets screen appears Targets screen appears. Only targets that the User is permitted to use,
appear on the page. As an
appear on the Targets page, as in the following figure. appear on the Targets page
48 | Smart 216/232 IP
. Before starting a remote session, Smart 216/232 IP must be
the target servers.
Only targets that the User is permitted to use,
As an Administrator can access all connected targets, they all Administrator can access all connected targets, they all
connected to
must be fully
steps 1 to 5 of the procedure