Configuring the Network
Performing Additional Configuration Operations
3. In the toolbar, select
The RICCs/ROCs Upgrade page appears.
4. Select the checkboxes of the servers connected to the RICCs/ROCs that you want
to upgrade. Click Select All to select all the servers.
5. Click Show Versions to verify the current hardware and firmware versions of the
selected servers.
6. In Upgrade File, locate and select the firmware upgrade file.
7. Click the Start Upgrade button.
Restoring Factory Settings
3.13.4
You can restore the Smart 216/232 IP unit to its factory settings. This restores the
original Smart 216/232 IP parameters, resetting all the information added by the
administrators, including: Network settings*, Servers, Switches, Users, and
Passwords.
You have the option to preserve Network settings – as explained in the following
procedure.
Once reset, the data cannot be retrieved.
44 | Smart 216/232 IP
.
Figure 36 – RICCs/ROCs Upgrade Page