Mounting The Unit; Figure 4 - Bracket Positions; Figure 5 - Bracket Connected For Rear Facing - Tripp Lite 0SU70036 User Manual

Mounting the Unit

Mounting the Unit
2.4.2
You can connect the Smart
mounting kit. The brackets can be placed in The brackets can be placed in two possible positions, as illustrated in
the following figure.
To rack mount the Smart
1. Place the brackets on the unit in either of the following ways:
 Towards the front of the unit so that the unit can be mounted owards the front of the unit so that the unit can be mounted front facing
 Towards the rear of the unit so that the unit can be mounted rear owards the rear of the unit so that the unit can be mounted rear facing owards the rear of the unit so that the unit can be mounted rear
Figure 5 illustrates the bracket connected for rear facing. illustrates the bracket connected for rear facing.
2. Screw the bracket to the Smart Screw the bracket to the Smart 216/232 IP unit using the screws provided
3. Install the Smart 216/232
the rack with screws, according to the rack manufacturer's instructions. the rack with screws, according to the
Smart 216/232 IP unit to a server rack, using the supplied rack
Figure 4 – Bracket Positions
Smart 216/232 IP unit:
on the unit in either of the following ways:
Figure 5 – Bracket Connected for Rear Facing Figure
216/232 IP nit into the server rack by connecting the bracket to nit into the server rack by connecting the bracket to
Rack Mounting the Smart 216/232 IP Unit Mounting the Smart 216/232 IP Unit
, using the supplied rack
screws provided.
rack manufacturer's instructions.
Installation
, as illustrated in
front facing
User Guide | 17