Figure 2 - Smart 216 Ip Unit Rear Panel; Figure 3 - Smart 232 Ip Rear Panel - Tripp Lite 0SU70036 User Manual

LED Functionality
Indicates the state of the Smart 216/232 IP unit: Green indicates that the unit is powered
Power LED
on; Red indicates that the unit is powered off.
Illuminate to indicate that a remote session is active.
Remote 1,
Remote 2 LEDs
Illuminates to indicate that the unit is connected to the network.
Link
The Smart 216 IP unit rear panel is illustrated in Figure 2; it has 16 server ports. The
Smart 232 IP unit rear panel is illustrated in Figure 3; it has 32 server ports.
The following connector table describes the functionality of the ports on the rear
panel of the Smart 216/232.
Port Functionality
For connecting a keyboard, video, and mouse to operate the Smart 216/232 IP locally;
Console KVM
optional.
For connecting the Smart 216/232 IP unit to any serial manageable devices, such as power
Serial 1
management units and routers, via the RS232 cable.
Note: Minicom's Serial Remote PowerSwitch must be connected to Serial 1.
For connecting the Smart 216/232 IP unit to any Serial device.
Serial 2
For updating firmware of the analogue part of the Smart 216/232 IP system - OSD,
Flash
Switch, RICCs, and ROCs.
Figure 2 – Smart 216 IP Unit Rear Panel
Figure 3 – Smart 232 IP Rear Panel
Installation
System Components
User Guide | 15