Configuring the Network
Configuring Power Outlets
2. Click Yes.
The Power Devices page opens
The Power Devices page opens; the deleted PDU does not appear on the page.
3.12 Configuring Power Outlets
Configuring Power Outlets
You must match a server to each power outlet of a power device defined in the
a server to each power outlet of a power device defined in the
a server to each power outlet of a power device defined in the
system.
When you want to power manage the
When you want to power manage the servers with double or more power supplies,
you need to assign multiple outlets to the same KVM port.
you need to assign multiple outlets to the same KVM port.
Perform the following procedure for each power device defined in the system.
Perform the following procedure for each power device defined in the system.
Perform the following procedure for each power device defined in the system.
To configure the power outlets
configure the power outlets:
1. From the configuration menu, select
From the configuration menu, select Power Outlets
The Power Outlets page appears.
2. In Name, select the PDU for which you want to configure the power
, select the PDU for which you want to configure the power outlets.
The number of outlets and Server Name dropdown menus
type of the selected PDU.
40 | Smart 216/232 IP
Figure
Figure 30 – Delete PDU Confirmation Page
; the deleted PDU does not appear on the page.
servers with double or more power supplies,
appears.
Figure 31 – Power Outlets Page
Figure
and Server Name dropdown menus corresponds
.
.
outlets.
s to the