Do an extended copy job ('Direct copy
mode' disabled)
Extended copy job
Before you begin
Make sure 'Direct copy mode' is disabled (See
page
111). Your copy job is not automatically sent to the printer. You can edit the print
settings before you send the copy job to the printer.
How to do an extended copy job
Place the original face down and right aligned.
1.
The scanner takes the original.
[57] Place the original face down and right aligned.
Select a Publisher Copy template or change the 'Destination' of an existing template to
2.
Publisher Copy.
Change the scan settings if necessary and press the green start key.
3.
When the document is scanned a 'New Job' window opens. In the 'Job Composition'
4.
section you can select your copy job and edit the print settings (See
Print Settings' window' on page
'Enable or disable 'Direct copy mode'' on
125).
Chapter 5 - The Océ Publisher Copy option
Extended copy job
'The 'Edit Document
123