Image Properties - Oce TC4 User Manual

'Image Properties'

Introduction
In the 'Image Properties' section, you can describe the original image and control its display
in the preview.
If needed, check and adjust the:
'File format' parameters
'Image Orientation': the 'Reading orientation' and the 'Legend position'.
Note:
The system uses this information to define how to print and fold the image.
'File Format'
Click the 'File Format' button to display the file format and the related parameters, if
any.
You can modify the parameters if needed.
Note:
The availability of parameters depends on the format.
'Image Orientation'
Define the reading orientation of the original image. You can:
Keep the default setting: 'Match CAD standard' to orient the image according to the
selected standard.
Manually select the 'Reading orientation':
- 'Landscape': when the long edge of the image is the top of the image
- 'Portrait': when the short edge of the image is the top of the image
Use the rotation as it was saved in the original image by selecting 'No rotation (as in
file)'
If needed, check the 'Add a 180 degrees extra rotation' box to rotate the image by 180
degrees.
This option can be used with any of the orientation values.
Chapter 5 - The Océ Publisher Copy option
'Image Properties'
127