Do A Basic Copy Job ('Direct Copy Mode' Enabled); Basic Copy Job - Oce TC4 User Manual

Basic copy job

Do a basic copy job ('Direct copy mode'
enabled)
Basic copy job
Before you begin
Make sure that 'Direct copy mode' is enabled (See
on page 111).
How to do a basic copy job
Place the original face down and right aligned.
1.
The scanner takes the original.
[56] Place the original face down and right aligned.
Select a Publisher Copy scan template or change the 'Destination' of an existing scan
2.
template to Publisher Copy.
Change the scan settings if necessary and press the green start key.
3.
Result
The scanner scans the original and sends the copy job directly to the Océ ColorWave
600 printer. The printer uses the print settings defined in the default copy template (See
'Change the default Publisher Copy print (copy) template' on page
122 Chapter 5 - The Océ Publisher Copy option
'Enable or disable 'Direct copy mode''
106).