Introduction To Océ Power Logic Controller Remote - Oce TC4 User Manual

Introduction to Océ Power Logic
Introduction to Océ Power Logic
Use the Océ Power Logic
application
In order to access the Océ TC4 Power Logic
workstation (e.g. when you have bought a system without a monitor, mouse and keyboard)
you must use Océ Power Logic
You can use Océ Power Logic
from a remote workstation.
'Scan jobs'
Use this workspace to manage your scan jobs and scan destinations.
Scanner 'Templates'
Use this workspace to manage the scanner templates.
'Preferences'
Use this workspace to change the default settings of the system.
'Configuration'
Use this workspace to set all the connectivity and security settings.
Note:
Certain functions cannot be used when you logon remotely to the Océ TC4 Power
®
Logic controller application e.g. scan-to-file viewing with Océ View station LT or using
the Océ Publisher Copy option.
User modes
The Océ TC4 Power Logic
TC4 users' on page
for the Océ service technician only. You can check in which user mode you are logged
on because the user name is displayed in the left hand side of the status bar at the bottom
of the screen.
68
Chapter 3 - OcéPower Logic
®
controller Remote
®
controller Remote to access the Océ TC4 Power Logic
®
controller Remote to connect to the controller.
®
controller Remote to access the following workspaces
®
controller application has different user modes.
20. An additional user mode is the Océ Service mode. This mode is
®
controller Remote
®
controller Remote
®
controller application from a remote
®
'The Océ