Oce TC4 User Manual page 51

Enable FTP on the workstation
2.
In the 'Scan jobs' area open the 'File' menu and select 'New' or click the 'New' button
3.
in the toolbar. The properties window appears.
Select FTP from the 'Type' drop-down list box.
4.
Enter the system name of the workstation where you created the shared folder. Find the
5.
system name of the workstation on the control panel of the workstation (Control panel
- Network - Identification - System name)
Enter the system name of the remote location and click 'Find' to identify the system lo-
6.
cation easily.
Enter the path name. This is the name of the shared folder on your workstation. For
7.
Windows NT
Windows 95/98
For access to the directory on the workstation through FTP, a user name and password
8.
is set on the FTP server that runs on the workstation. Enter this user name and this
password in the required fields on the properties window.
Set the required file naming properties
9.
Click Ok.
10.
The Power Logic
jobs' view area then shows the contents of the new FTP destination.
Note:
You can create up to 10 destinations. Names in Japanese can only be entered for remote
destinations in SMB.
Lock a scan destination
Select a scan destination.
1.
Open the 'File' menu and select 'Properties'.
2.
Check the 'Locked' check box.
3.
Click Ok to accept the scan destination settings.
4.
The destination properties are now locked.
Note:
This option is only available if you are logged on as a key operator.
Unlock a scan destination
Select a scan destination.
1.
Open the 'File' menu and select 'Properties'.
2.
® ®
, Windows 2000 and XP, use the DOS name of the shared folder. For
®
use the folder name. This is case sensitive.
®
controller application connects to the new FTP destination. The 'Scan
Manage scan destinations in the 'Scan jobs' workspace
Chapter 2 - Use the Océ TC4 51