Table of Contents
Advertisement
Calibrate the scanner
Calibrate the scanner
Introduction
You can calibrate the scanner when you are not satisfied with the scan quality. Use the
calibration wizard to calibrate the scanner.
Before you begin
Clean the glass plate clean before you start the calibration procedure
on page
170. A dirty glass plate causes a decreased scan quality. Clean the glass plate when
you have lines on the image that are not on the original.
How to calibrate the scanner
Select 'System' with the lower-right softkey.
1.
The 'System settings' screen opens.
Select 'Scanner calibration' with a left softkey to start the calibration wizard.
2.
The message 'Insert calibration sheet' and the following icon appears.
[67] The 'Insert calibration sheet' icon
Insert the calibration sheet and press the green start key to start the calibration process.
3.
The message 'Scanner is calibrating...' and the following icon appears.
[68] The 'Scanner is calibrating...' icon
When the calibration process is ready, the message 'Press OK to continue' and the follow-
ing icon appears.
[69] The remove the calibration sheet icon
172
Chapter 8 - Maintain the Océ TC4
'Clean the scan area'
Hide quick links:
Advertisement
Table of Contents
