The Océ Tc4 Users - Oce TC4 User Manual

The Océ TC4 users
The Océ TC4 users
Introduction
The Océ TC4 will be used by various users within your company or department. Depend-
ing on the tasks that you need to perform on the Océ TC4 you may need certain access
rights to the Océ TC4 and the Océ TC4 Power Logic
appointed by your company. Please contact the person responsible for the scanner to find
out what rights and user role you need to work with the Océ TC4. With the appointment
of the user roles and the dedicated workspaces you can fully customize the scanner to fit
with your workflow.
On the Océ TC4 the following user roles can be identified.
Overview of user rights per workspace in the Océ TC4 Power Logic
The table below indicates if the users have read rights or only view rights in the 4 main
workspaces.
X: indicates that the user has full rights in this workspace
0: indicates that the user is only allowed to view the information in the workspace
1
: indicates that the user can switch scanner templates from the template library to the
scanner operator panel.
2
: indicates that the user is allowed to lock or unlock scan destinations.
#
Workspace —>
User role
'Anonymous'
Repro operator
Key operator
System administrator
'Anonymous' user
The 'Anonymous' user is a common user who uses the Océ TC4 for scan jobs. The
common or walk-up user has no permission to change the system settings.
In the integrated Power Logic
or her own scan-to-file jobs in the 'Scan jobs' workspace.
20 Chapter 1 - Introduction
'Scan jobs' Scanner
'Templates'
X 0
X 1
0
2 X
X
0 0
®
controller application, the anonymous user can delete his
®
controller. The access rights are
®
'Prefer- 'Configura-
ences' tion'
0 0
0 0
X 0
0 X
controller