Delete Scanned Files - Oce TC4 User Manual

Delete scanned files

Purpose
Delete scanned files from a selected local scan destination.
When to do
You do not want to keep the scanned file.
You want to clean up a local scan destination.
Before you begin
Make sure you have sufficient permissions when you log on to the Océ TC4 Power
®
Logic controller application.
'Anonymous' - permission, editing and other actions are allowed
Repro operator - permission, editing and other actions are allowed
Key operator - permission, editing and other actions are allowed
System administrator - permission, editing and other actions are allowed
Note:
You cannot remove scanned files stored at a remote location.
How to delete a scanned file
Click 'Scan jobs' in the vertical icon toolbar on the left hand side of the screen.
1.
Select a local scan job destination in the 'Scan destinations'.
2.
Select the job(s) you want to delete in the 'Scan jobs' view area in the left hand side of
3.
the screen.
Note:
Make sure that you select one or more scan jobs. If you select the scan job destination,
the 'Delete' action removes the (local) scan job destination instead of the scan job(s).
Click 'Delete' in the toolbar of the 'Scan destinations' or right-click and select 'Delete'
4.
from the drop down menu.
Repeat these actions for each scanned file that you want to delete.
5.
Delete scanned files
Chapter 2 - Use the Océ TC4 57