Rxcommands Receiver Configuration - Novatel EuroPak-15ab User Manual

Chapter 6
6.3.8

RXCOMMANDS Receiver Configuration

This log outputs all of the current receiver configuration parameters set using the commands in Chapter 5.
When requested, one RXCOMMANDS log is output for each command type. The embedded message is the
most-recent command string entered by you for that command type. If you have not yet entered a command
string for that command type, the default configuration values from start-up are provided.
Log Type: Polled
Field Field Name
1 header
command
2
type
3 e msg
4 32-bit CRC (ASCII and Binary only)
Recommended Input:
LOG RXCOMMANDSA ONCE
Example Output:
#RXCOMMANDSA,COM1,44,80.0,FINE,439,232702.670,00A41000,0000,33331;
4,COM COM1 230400 N 8 1 N OFF ON*0AEE4B3F
#RXCOMMANDSA,COM1,43,80.0,FINE,439,232702.672,00A41000,0000,33331;
20,CHANCONFIG24GALILEO8GPS*21083552
#RXCOMMANDSA,COM1,42,80.0,FINE,439,232702.674,00A41000,0000,33331;
5,ECUTOFF 10.0*F1DBFE25
#RXCOMMANDSA,COM1,41,80.0,FINE,439,232702.675,00A41000,0000,33331;
7,FIX NONE*D28AC210
#RXCOMMANDSA,COM1,40,80.0,FINE,439,232702.675,00A41000,0000,33331;
21,PULSEBLANKING L1 127*D372D5DC
#RXCOMMANDSA,COM1,39,80.0,FINE,439,232702.679,00A41000,0000,33331;
21,PULSEBLANKING L5 127*4D256AE3
#RXCOMMANDSA,COM1,38,80.0,FINE,439,232702.680,00A41000,0000,33331;
21,PULSEBLANKING E5B 127*B567DC0E
#RXCOMMANDSA,COM1,37,80.0,FINE,439,232702.680,00A41000,0000,33331;
39,DLLORDER GPS 1*597D0670
#RXCOMMANDSA,COM1,36,80.0,FINE,439,232702.682,00A41000,0000,33331;
2,ANTENNAPOWER ON*7977E4D8
#RXCOMMANDSA,COM1,35,80.0,FINE,439,232702.682,00A41000,0000,33331;
3,CLOCKADJUSTDISABLE*0169268B
#RXCOMMANDSA,COM1,34,80.0,FINE,439,232702.685,00A41000,0000,33331;
4,COM COM3 115200 N 8 1 N OFF ON*10FD1D32
#RXCOMMANDSA,COM1,33,80.0,FINE,439,232702.687,00A41000,0000,33331;
47,POSITIONTYPE GPSL1*5A4C0818
#RXCOMMANDSA,COM1,32,80.0,FINE,439,232702.688,00A41000,0000,33331;
45,SDLLBW 0 0.2000*3D836CFF
90
Data Description
This field contains the message header, in ASCII or Binary format.
See Section 4.3 on Page 38.
Indicates which command the embedded message
represents, see Table 42 on Page 92.
Embedded message of the most-recent command
string you entered. If a command string has not been
entered yet, the default values from start-up will be
provided.
Format
Int
Uchar
[variable]
Hex
EuroPak-15ab Receiver User Manual Rev 1
Data Logs
Message ID: 579
Bytes Offset
H 0
4 H
variable H+4
4 variable