Freset Clear Data In Nvm - Novatel EuroPak-15ab User Manual

Commands
5.3.9

FRESET Clear Data in NVM

This command clears data which is stored in the receiver's non-volatile memory and restores the receiver to
factory default settings. The receiver is forced to hardware reset.
Syntax:
FRESET
Field
Field
Name
This field contains the Abbreviated ASCII command name. See Section 4.1 on
1 header
Page 34.
Reserved field required for Binary format only. Set to 0 when entering the
2
command in Binary.
Example:
FRESET
EuroPak-15ab Receiver User Manual Rev 1
Valid Values Description
Chapter 5
Message ID: 20
Binary Binary
Format
Bytes Offset
H 0
Enum 4 H
61