Advertisement
CONFIGURATION DETAILS:
Before you install the card, you must ensure that the Address and IRQ settings are
correct, and that they do not conflict with other hardware installed on the same PC.
The GPSCard's default DIPswitch settings configure the card with a base address of
150 and an IRQ (interrupt request) setting of 5. (Switch 2 in the on position represents
an address of 150, and switch 4 on position represents an IRQ of 5 as shown below).
For more information on the different IRQ and Address settings, please refer to the
NovAtel manual.
NovAtel Card: Base Address and IRQ DIP Switch Setting
WinFrog User's Guide - Appendix C – GPS/NovAtel Con
Page 18 of 22
Advertisement
