Fdb Commands - Allied Telesis AT-9108 Manual

FDB Commands

Command
clear fdb {<mac_address> | vlan <name> |
<portlist>}
config fdb agingtime <number>
create fdbentry <mac_address> vlan <name>
[blackhole | <portlist> | dynamic] {qosprofile
<qosname>}
delete fdbentry <mac_address> vlan <name> Deletes a permanent FDB entry.
show fdb {<mac_address> | vlan <name> |
<portlist> | permanent | qos}
AT-9108, AT-8518, AT-8525, and AT-8550 User's Command Guide
Description
Clears dynamic FDB entries that match the filter. When no options
are specified, the command clears all FDB entries.
Configures the FDB aging time. The range is 15 through 1,000,000
seconds. The default value is 300 seconds. A value of 0 indicates that
the entry should never be aged out.
Creates an FDB entry. Specify the following:
mac_address — Device MAC address, using colon
separated bytes.
name — VLAN associated with MAC address.
blackhole — Configures the MAC address as a blackhole
entry.
portlist — Port numbers associated with MAC address.
dynamic — Specifies that the entry will be learned
dynamically. Used to associated a QoS profile with a
dynamically learned entry.
qosname — QoS profile associated with MAC address.
If more than one port number is associated with a permanent MAC
entry, packets are multicast to the multiple destinations.
Displays the switch FDB contents.
7