Allied Telesis AT-9900s Installation Manual
Expansion module
Hide thumbs
Also See for AT-9900s:
- Installation and safety manual (38 pages) ,
- How to configure (110 pages) ,
- Hardware reference manual (47 pages)
Related Manuals for Allied Telesis AT-9900s
Summary of Contents for Allied Telesis AT-9900s
- Page 1 AT-9900s Switches Expansion Module Installation Guide AT-A60 AT-A61 AT-A62...
- Page 2 AT-9900s Series Switch Expansion Modules Expansion Module Installation Guide for AT-9900s Switches Document Number 613-000032 REV B © 2005 Allied Telesyn Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn Inc.
-
Page 3: Table Of Contents
Installation Guide Contents Models Covered by this Guide ..................4 Package Contents ......................4 Overview ..........................4 XFP Port ..........................5 SFP Ports ..........................7 RJ-45 Ports ......................... 9 Installation Procedure ....................10 Documentation ....................... 11... -
Page 4: Models Covered By This Guide
Contact your sales representative if either is damaged or missing. Overview Two front bays in the AT-9900s switch allow quick and easy installation of optional expansion modules (XEMs). These modules enable economical combinations of speed and port density with the AT-9900s Series gigabit link aggregation switch. -
Page 5: Xfp Port
Installation Guide XFP Port The single-port 10Gigabit Ethernet expansion module, model AT-A60, features the following: ■ support for hot-swappable XFP modules ■ two 16MByte DDR-SDRAM for packet buffering ■ compatibility with a number of different 10 Gb XFP serial transceivers ■... - Page 6 AT-9900s Series Switch Expansion Modules The following XFP modules are approved for the AT-A60 expansion module. Product No. Media Type Description AT-XPSR 10GBASE-SR 850nm short-haul transmission, 300m with MMF. AT-XPLRM 10GBASE-LRM 1310nm short-haul transmission, 300m with MMF. AT-XPLR 10GBASE-LR 1310nm medium-haul transmission, 10km with SMF.
-
Page 7: Sfp Ports
Installation Guide SFP Ports The 12-port 1000BASE-X expansion module, model AT-A61, features the following: ■ two rows of 6 SFP ports ■ support for hot-swappable SFP modules ■ status LEDs ■ two 16MByte DDR-SDRAM for packet buffering ■ cable fault detection and distance-to-fault diagnostics for copper SFP ports (see the Test Facility chapter in the Software Reference for the switch) Front view AT-A61 PORTS 1-12... - Page 8 AT-9900s Series Switch Expansion Modules The following SPF modules are approved for AT-A61expansion modules. Product No. Media Type Description AT-SPTX 10/100/1000BASE-T Copper, 100m at 1000Mbps, RJ-45 connector. AT-SPSX 1000BASE-SX 850nm, 2 to 550 m with 50/125µm fiber, 2m to 275m with 62.5/125µm fiber, LC connector.
-
Page 9: Rj-45 Ports
Installation Guide RJ-45 Ports The 12-port RJ-45 expansion module, model AT-A62, features the following: ■ two rows of 6 RJ-45 ports ■ gigabit ports that support speeds of 10/100/1000 Mbps ■ status LEDs ■ two 16MByte DDR-SDRAM for packet buffering ■... -
Page 10: Installation Procedure
■ Read the safety information for the switch. Safety information is available in the Installation and Safety Guide that is on the CD-ROM for the AT-9900s switch. Or you can download this document from www.alliedtelesyn.co.nz/documentation. ■ Gather necessary tools. -
Page 11: Documentation
Installation Guide Secure the module by tightening the thumbscrews on it. Apply power to the switch by re-attaching the power cord. If you disconnected a redundant power supply, reconnect it. Restart the switch and verify installation with the show log command to confirm there is no error message about installation in the log file.
Need help?
Do you have a question about the AT-9900s and is the answer not in the manual?
Questions and answers