Adding A Waypoint - Standard Horizon GX2000E Owner's Manual

14.2 ADDING A WAYPOINT

1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu" appears.
2. Rotate the CHANNEL knob to select
"WAYPOINT SETUP".
3. Press the [ SELECT ] soft key, then select "WAYPOINT
DIRECTORY" with the CHANNEL knob.
4. Press the [ SELECT ] soft key, then select
"ADD" with the CHANNEL knob.
5. Press the [ SELECT ] soft key.
6. Enter the Waypoint Name, by rotating the
CHANNEL knob to select the first letter.
7. Press the [ ENT ] soft key to store the first let-
ter and to move to the second letter in the
name.
8. Repeat step 5 and 6 until the name is shown.
Press the [ ENT ] soft key to skip a letter if needed.
9. Press and hold the [ ENT ] soft key, then enter the coordinates of the waypoint
POSITION, by rotating the CHANNEL knob to select the first digit in the
Latitude.
10. Press the [ ENT ] soft key to store the first number
and to move to the second number in the position.
11. Repeat step 9 and 10 until the latitude is shown in-
clude N or S in the last digit.
12. Press the [ ENT ] soft key to select the first digit of
the Longitude is blinking.
13. Rotate the CHANNEL knob to select the first digit in
the Longitude.
14. Press the [ ENT ] soft key to store the first number
and to move to the second number in the position.
15. Repeat step 13 and 14 until the Latitude is shown
include E or W in the last digit.
16. After all information is entered, press and hold the
[ ENT ] soft key to store the waypoint into memory.
17. Press the [ QUIT ] soft key several times to return to radio operation.
Page 108 GX2000E/GX2100E