Atis Setup; Atis Ch Group - Standard Horizon GX2000E Owner's Manual

15 ATIS SETUP

The GX2000E/GX2100E supports the ATIS ( Automatic Transmitter Identifica-
tion System) used in Inland waterways in Europe. When enabled ATIS mode
transmits a unique ATIS code each time the Microphone's PTT button is re-
leased at the end of a transmission. Users should check with their local marine
regulatory authority in their country for assistance in obtaining an ATIS code.

15.1 ATIS CH GROUP

The GX2000E/GX2100E has the capability to turn on and off the ATIS feature
for each channel group.
1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu" appears.
2. Rotate the CHANNEL knob to select "ATIS
SETUP" menu.
3. Press the [ SELECT ] soft key, the select "GROUP"
with the CHANNEL knob.
4. Press the [ SELECT ] soft key, then rotate the
CHANNEL knob to select the channel group
you wish to change the setting.
5. Press the [ ENT ] soft key, then rotate the
CHANNEL knob to select "On" or "Off".
6. Press the [ ENT ] soft key to store the selected
setting.
7. Press the [ QUIT ] soft key several times to re-
turn to radio operation.
The "SCAN" and "Dual Watch" features do not activate on the Chan-
nel Group which turned on the ATIS feature.
The TX output power is set to "1W" automatically on the following
channels of the Channel Group which turned on the ATIS feature.
CH 06, 08, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, 75, 76, and 77
Page 112
NOTE
GX2000E/GX2100E