2.4 The Rear Ports
BiPAC 5200W
Port
Antenna
1
Power
2
Switch
3
Power
Reset
4
Ethernet
5
DSL
6
(LINE)
Connect the antenna to this port.
Power on/off switch.
Connect the supplied power adapter to this jack.
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password).
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
Connect the supplied RJ-11 ("telephone") cable to this port when
connecting to the ADSL/telephone network.
Meaning
11