Billion BiPAC 5200W User Manual page 57

Destination MAC: Set the Ethernet MAC value that you want to filter in destination side.
IP: Set the IP address value that you want to filter in destination side.
Mask: Set the subnet mask value that you want to filter in destination side.
Range: Set the port range value that you want to filter in destination side.
Source MAC: Set the Ethernet MAC value that you want to filter in source side.
IP: Set the IP address value that you want to filter in source side.
Mask: Set the subnet mask value that you want to filter in source side.
Port Range: Set the port range value that you want to filter in source side.
Protocol ID: Set the protocol ID type that you want to filter.
Vlan ID Range: Set the Vlan value that you want to filter.
IPP/DS Field: Select IP QoS format: IPP/TOS, DSCP.
IP Precedence Range: Select the IP precedence range (unavailable when you select DSCP in
IPP/DS Field)
Type of Service: Select 5 different type of service (unavailable when you select DSCP in IPP/DS
Field).
DSCP Range: Set the DSCP value that you want to filter (unavailable when you select IPP/TOS in
IPP/DS Field).
802.1p: Set the remarked new 802.1p priority value on the packet that fulfill every detail setting
condition of each rule.
Action
After finishing all rules detail condition setting, select the rule you want to execute and action here.
IPP/DS Field: Select IP QoS format.
IP Precedence Remarking: Select the remarking value of IP precedence (unavailable when you
select DSCP in IPP/DS Field).
Type of service Remarking: Select the remarking value of type of service (unavailable when you
select DSCP in IPP/DS Field).
DSCP Remarking: Select the remarking value of DSCP (unavailable when you select IPP/TOS in
IPP/DS Field).
802.1p Remarking: Select the remarking value of 802.1p.
Queue #: Select four types of Queue: Low, Medium, High, Highest.
54