Billion BiPAC 5200W User Manual page 56

Rule
You can set 16 different QoS rules. Each QoS rule has its detail setting conditions like: 802.1p
application, DSCP, IP, MAC, Protocol, TOS, VLAN etc, you can modify the default value to any new
one you wish. Please notice that only when the packet fulfill every detail setting conditions here, then
this packet will be remarked as the priority queue of each rule. The non-selected setting part will be
treated as "don't care" and the system will not handle this setting part. If the original packet does not
have 802.1q tagged header, system will not add header for this packet even the detail setting condition
has adding 802.1p priority ability.
QoS: Select Activated to activate the following configuration, and if your select Deactivated, the
following will be gray, that is, the configuration is unavailable.
Summary: the settings of this QOS configuration.
Rule Index: Select 16 different rules, each rule's detail can be set and saved.
Active: Select QoS rule is activated or deactivated.
Application: Select 11 different applications: IGMP, SIP, H.323, MGCP, SNMP, DNS, DHCP, RIP,
RSTP, RTCP, RTP.
Physical Ports: this function is to allow you to decide which physical port you want to
configure ,before you begin to configure, please make sure QoS is activated.
53