Time Zone - Billion BiPAC 5200W User Manual

4.5.2 Time Zone

The router does not have a real time clock on board; instead, it uses the Simple Network Time Protocol
(SNTP) to get the current time from an SNTP server outside your network. Choose your local time
zone. After a successful connection to the Internet, the router will retrieve the correct local time from
the SNTP server you have specified. If you prefer to specify an SNTP server other than those in the
drop-down list, simply enter its IP address as shown above. Your ISP may provide an SNTP server for
you to use.
Synchronize time with: Select the time service protocol that your time server sends when you turn
on the Router.
Time Zone: Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight Saving: Select this option if you use daylight savings time.
NTP Server Address/NTP Server2 Address: Enter the IP address of your time server. Check with
your ISP/network administrator if you are unsure of this information.
Press SAVE to apply your settings.
65