Lan And Wan Port Addresses; Information From Your Isp - Billion BiPAC 5200W User Manual

3.4 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.
IP address
Subnet Mask
DHCP server function
IP addresses for
distribution to PCs

3.5 Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) which kind
of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
PPPoA
RFC1483 Bridged
RFC1483 Routed
LAN Port
192.168.1.254
255.255.255.0
Enabled
100 IP addresses continuing
from 192.168.1.100 through
to 192.168.1.199
VPI/VCI, VC-based/LLC-based
Password, Service Name, and Domain Name System (DNS)
IP address (it can be automatically assigned by your ISP when
you connect or be set manually).
VPI/VCI, VC-based/LLC-based
Password, and Domain Name System (DNS) IP address (it
can be automatically assigned by your ISP when you connect
or be set manually).
VPI/VCI, VC-based/LLC-based multiplexing to use Bridged
Mode.
VPI/VCI, VC-based/LLC-based multiplexing, IP address,
Subnet mask, Gateway address, and Domain Name System
(DNS) IP address (it is fixed IP address).
24
WAN Port
The PPPoE function
enabled to automatically get
the WAN port configuration
from the ISP.
multiplexing, Username,
multiplexing, Username,
is