Billion BiPAC 5200W User Manual page 36

Static IP: Select this option to set static IP information. You will need to enter in the Connection
type, IP address, subnet mask, and gateway address, provided to you by your ISP. Each IP address
entered in the fields must be in the appropriate IP form, which is four IP octets separated by a dot
(x.x.x.x). The Router will not accept the IP address if it is not in this format.
PPPoA/PPPoE: Select this option if your ISP requires you to use a PPPoE connection. This
option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address
automatically for your PPPoE connection. Select Static PPPoE to use a static IP address for your
PPPoE connection. Please enter the information accordingly.
Bridge Mode: Mainly use the MAC address to determine whether to forward data, in this way,
the router works like a switch. Select this mode if your ISP uses this mode.
PPPoE/PPPoA
Select this option if your ISP requires you to use a PPPoE connection. This option is typically used for
DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE
connection. Select Static PPPoE to use a static IP address for your PPPoE connection. Please enter
the information accordingly.
Servicename: Enter a name for the PPPoE/PPoA connection.
Username: Enter the user name exactly as your ISP assigned.
Password: Enter the password associated with the user name above.
Encapsulation: select in the Mode field, select PPPoE LLC, PPPoE VC-Mux, PPPoA LLC, PPPoA
VC-Mux.
Half Bridge: The Half Bridge mode can only be used when a single IP address has been assigned
by the ISP. It is used when the use of NAT is not desired and there is a single computer attached to the
router.
Connection: The schedule rule(s) have priority over your Connection settings.
Always on: Select Always on Connection when you want your connection up all the time.
Connect on Demand: Select Connect on Demand when you don't want the connection up all
the time and specify an idle time-out in the Max Idle Timeout field.
Connect manually: Select this mode if you want to connect manually.
TCP MSS Option: Enter the TCP Maximum Segment Size (MSS)
Get IP Address: Choose Static or Dynamic
Static IP Address: Enter the IP address of ADSL Router in dotted decimal notation, for example,
xx.xx.xx.xx.
IP Subnet Mask: The default is 0.0.0.0. User can change it to other such as 255.255.255.0.Type
the subnet mask assigned to you by your ISP (if given).
Gateway: You must specify a gateway IP address (supplied by your ISP) when you use 1483
Bridged IP in the Encapsulation field in the previous screen.
NAT: Select this option to Disabled/Enable the NAT (Network Address Translation) function for this
VC. The NAT function can be activated or deactivated per PVC basis
Default Route: If enable this function, the current PVC will be the default gateway to internet from
this device
33