Package Contents; Connecting To Power; System Requirements - D-Link DWL-8710AP Quick Installation Manual

Introduction
This Quick Installation Guide gives you step-by-step instructions for setting up your DWL -8710AP 802.11n/ac
Unified Wireless Outdoor PoE Access Point. For more detailed information about the access point,
configuring the device, and technical specifications, please refer to the User Manual.

Package Contents

• DWL-8710AP
• 2 antennas (2.4 GHz)
• 2 antennas (5 GHz)
• 4 antenna connector caps
• 2 waterproof seals for Ethernet-cable
• Grounding wire (180 cm)
• Wall/pole mounting kit
• CD-ROM with documentation
• Warranty Certificate
If any of the above items are damaged or missing, please contact your local D-Link reseller.

Connecting to Power

To power the DWL-8710AP, please use any D-Link IEEE 802.3at-compliant PoE switch or a PoE injector
(f.i. DPE-301GI).

System Requirements

• CD-ROM drive
• Computer with Windows, Macintosh, or Linux-based operating system
• Installed and operational Ethernet adapter
• Internet Explorer 6.0, Chrome 2.0, Safari 2.0, or Firefox 3.0 and above