Connecting Poe (Power Over Ethernet) - D-Link DWL-7700AP User Manual

DWL-7700AP User's Manual
Getting Started (continued)

Connecting PoE (Power over Ethernet)

Step 1
Step 2
Step 3
D-Link Systems, Inc.
Connect one end of an Ethernet cable (included with your package) to the LAN port on
the DWL-7700AP and the other end of the Ethernet cable to the port labeled P+DATA
OUT on the PoE base unit.
Connect another Ethernet cable from the P+DATA IN port on the PoE base unit to
your router/switch or to a PC.
Attach the power adapter to the connector on the PoE base unit. Attach the power
cord to the power adapter and into an electrical outlet.
Getting Started
13