Wlan Partition - D-Link DAP-3315 User Manual

Section 3 - Configuration
This page allows the user to configure a WLAN Partition.
Wireless Band: Displays the current wireless band.
Link Integrity: Select Enable or Disable. If the Ethernet
connection between the LAN and the AP is
disconnected, enabling this feature will cause
the wireless segment associated with the AP to
be disassociated from the AP.
Ethernet WLAN The default is Enable. When disabled, all data
Access:
from the Ethernet to associated wireless devices
will be blocked. Wireless devices can still send
data to the Ethernet.
Internal Station
The default value is Enable, which allows stations
Connection: to intercommunicate by connecting to a target
AP. When disabled, wireless stations cannot
exchange data on the same Multi-SSID. In Guest
mode, wireless stations cannot exchange data
with any station on your network.
Guest Mode: Select this option to disallow communication
between wireless clients connected to the same
SSID and between wireless clients connected to
different SSIDs configured on the access point.
D-Link DAP-3315 User Manual

WLAN Partition

41