Wlan Partition - D-Link NUCLIAS CONNECT DAP-2620 User Manual

Web User Interface
The page allows the user to configure a WLAN Partition.
Wireless Band Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Ethernet to WLAN Access
Click the drop-down menu to enable or disable
the Ethernet devices to communicate with
wireless clients. When disabled, all data from the
Ethernet to associated wireless devices will be
blocked. Wireless devices can still send data to
the Ethernet.
Internal Station
Click the radio button to a specific mode. The
Connection modes are defined as follows:
y Enable: Allows communication between
wireless clients connected to the same SSID
and wireless clients connected to different
SSIDs configured on this access point.
y Disable: Disallows communication between
wireless clients connected to the same SSID,
while allowing communication between
wireless clients configured on this access
point which are connected to different SSIDs.
y Guest: Disallows communication between
wireless clients configured on the access
point even when connected to the same or
different SSIDs.
Save
Click to save the updated configuration.
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-2620 User Manual

WLAN Partition

62