Menu Overview - Octave Copy Master II User Manual

3. Menu Overview

This section provides an overview of the menu options. these menu options
are explained in detail on the referenced pages.
1. Copy
Use the Copy menu or Copy quick key to make CD/DVD copies. Before you
start a copy, make sure you have selected the correct Master Reading Source.
For additional information, see "Making Copies" on page 21 or "Making
Hard Drive (HDD)-to-Disc Copies" on page 25.
2. Test
Use the Test menu or Test quick key to simulate the copy process. With sim-
ulation, write once recordable discs such as DVD-R, or CDR will be reusable.
The purpose of simulation is to ensure error free duplication.
Note: Due to physical limitations of the DVD+R recordable for-
mat, if you try to simulate DVD+R copying, you will encounter
failure messages.
Warning: If you are using CD/DVD ReWritable discs as your
blank media during the simulation, the content on those discs will
be permanently erased.
3. Compare
Use the Compare function to perform a bit-by-bit comparison between the
Master Reading Source and all of the disc copies in the Writer Trays. This en-
sures that all of your copies are identical to the Master Reading Source.
Note: The Compare and Copy+Compare functions only work
with data discs, and do not work with audio/video discs.
4. Test + Copy
Use the Test + Copy menu option to simulate the copying process. If every-
thing passes during the simulation, the Copy Master II performs the actual
copy process. If an error is encountered during the simulation, the Copy Mas-
ter II displays an error message, and the copy process is not initiated.
5. Copy + Compare
Use the Copy + Compare menu option to make verified copies. After the copy
process is done, the Copy Master II automatically compares the copies to the
Master Reading Source to ensure data correctness.
8
Copy Master II User's Guide
Octave Systems Inc
page 21
page 29
page 29
page 31
page 31