Octave Copy Master II User Manual page 23

Copy
Counter:
No Counter
Preparing...
Waiting for Master
Preparing...
Waiting for Blanks
Preparing...
7 Disc Detected, Go?
Note: By default, the "Auto Start" setting is set to "Auto." For
example, if your duplicator has detected three blank discs and
didn't detect any additional blank discs within 30 seconds, then
the duplication starts automatically.
Once the number of blank discs you inserted matches the number of discs de-
tected on the screen, press the
Auto Start or wish to speed up the process). The Processing screen will ap-
pear.
Processing...
Please Wait
After two or three seconds of processing time, one of the following
Copy Progress screens will appear.
Octave Systems Inc.
Follow the instructions shown in "Set-
ting Counters" on page 17 to continue.
Once the counters have been set, press
the Enter button to confirm. You will
see the Waiting for master screen.
The duplicator requests the master disc
first. Once it has read the master, it re-
quests the blank discs.
Allow 5-10 seconds for the duplicator to
detect your blank discs. After the discs
have been recognized, you will see a
screen similar to this:
The "7" indicates that the duplicator
recognized seven discs in the writer
tray. The actual quantity may be differ-
ent on your machine.
Enter button to confirm (if you are not using
Note: If the number of blank discs you
inserted doesn't match the number of
discs detected on the screen, wait 10-15
seconds for the duplicator to recognize
all of your blank discs.
23